DLSW Lite on Hub-and-Spoke topology

From: Hedi Abdelkafi (Hedi.Abdelkafi@simac.lu)
Date: Thu Oct 10 2002 - 13:06:43 GMT-3

• Next message: Adam Quiggle: "Re: OT: CCIE Plaque"
• Previous message: Enrique Hernandez: "WRED parameters?"
• Next in thread: Hedi Abdelkafi: "RE: DLSW Lite on Hub-and-Spoke topology"
• Maybe reply: Hedi Abdelkafi: "RE: DLSW Lite on Hub-and-Spoke topology"
• Maybe reply: Ibrahim: "RE: DLSW Lite on Hub-and-Spoke topology"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have a problem with DSLW on a Hub-and-Spoke topology
I use DLSW Lite.

Here's the topology

-eth-RTA----FR----RTB-eth
                  |
                  |
               RTC
                 |
               eth

RTA and RTB are configured without sub-interface (Spoke).
RTC is configured with PTM interface (Hub).

Netbios can flow from RTA to RTC and from RTC to RTB.
But NOT from RTA to RTB !

Why ?

I replaced the PTM on RTC with 2 sub-interfaces.
I have the same problem.

Can anyone explain me what do I need to do, in order to have the traffic
flowing from RTA
to RTB ? (using DLSW direct encapsulation or DLSW Lite naturally).

Is it possible ?

Thanks a lot for your help.

PS : Sorry for my bad english....

• Next message: Adam Quiggle: "Re: OT: CCIE Plaque"
• Previous message: Enrique Hernandez: "WRED parameters?"
• Next in thread: Hedi Abdelkafi: "RE: DLSW Lite on Hub-and-Spoke topology"
• Maybe reply: Hedi Abdelkafi: "RE: DLSW Lite on Hub-and-Spoke topology"
• Maybe reply: Ibrahim: "RE: DLSW Lite on Hub-and-Spoke topology"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3