From: Ibrahim (ibrahim@sisindosat.co.id)
Date: Fri Oct 25 2002 - 00:43:17 GMT-3
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I think you should have direct Frame Relay PVC from RTA to RTB in order
to work if you want to use direct/lite. If not, use DLSW+ TCP.
Regards
Ibrahim
- -----Original Message-----
From: Hedi Abdelkafi [mailto:Hedi.Abdelkafi@simac.lu]
Sent: Thursday, October 10, 2002 11:07 PM
To: ccielab@groupstudy.com
Subject: DLSW Lite on Hub-and-Spoke topology
Hi,
I have a problem with DSLW on a Hub-and-Spoke topology
I use DLSW Lite.
Here's the topology
- -eth-RTA----FR----RTB-eth
|
|
RTC
|
eth
RTA and RTB are configured without sub-interface (Spoke).
RTC is configured with PTM interface (Hub).
Netbios can flow from RTA to RTC and from RTC to RTB.
But NOT from RTA to RTB !
Why ?
I replaced the PTM on RTC with 2 sub-interfaces.
I have the same problem.
Can anyone explain me what do I need to do, in order to have the traffic
flowing from RTA
to RTB ? (using DLSW direct encapsulation or DLSW Lite naturally).
Is it possible ?
Thanks a lot for your help.
PS : Sorry for my bad english....
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>
iQA/AwUBPbi94/dNbkULxYdTEQIQ3gCgtCe9tnWDPnMYXAvZdrp2ChC4K3wAoI3S
9Vw0e+czKWPayX14Uk06qXKL
=I9hR
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3