From: Balaji Siva (bsivasub@cisco.com)
Date: Thu Oct 03 2002 - 21:16:35 GMT-3
cat4k sup3/4, cat6k sup1/2 with pfc , 2948gl3/4908g-l3, 4232l3 (on gig port)
besides the 2950/3550
B
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chris Young
Sent: Thursday, October 03, 2002 7:36 PM
To: 'Desimone, Aurelio'; 'Huy Luu'; ccielab@groupstudy.com
Subject: RE: switch that can do rate limit
2950's can rate limit but it is only granular to the 1MB/sec level. The
3550 can rate limit in increments of 8k/sec.
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Desimone, Aurelio
Sent: Thursday, October 03, 2002 6:41 PM
To: 'Huy Luu'; ccielab@groupstudy.com
Subject: RE: switch that can do rate limit
I think 3550 with emi can do it (with a policy map)
-----Original Message-----
From: Huy Luu [mailto:hluu@veroxity.com]
Sent: Thursday, October 03, 2002 5:19 PM
To: ccielab@groupstudy.com
Subject: switch that can do rate limit
Hi all,
Is there any Cisco catalyst switches that can do rate-limiting on the
port
level? Can someone provide Catalyst model software that can support
this
feature?
Many thanks in advance
Huy Duc Luu
Veroxity Technology Partners
Fax 617-779-3099
Cell# (617) 293-0940
Email: hluu@veroxity.com
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3