From: P729 (p729@cox.net)
Date: Thu Oct 03 2002 - 22:06:53 GMT-3
"2950's can rate limit but it is only granular to the 1MB/sec level."
...and in the inbound direction only.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Chris Young" <csyoung@speakeasy.net>
To: "'Desimone, Aurelio'" <ADesimone@refco.com>; "'Huy Luu'"
<hluu@veroxity.com>; <ccielab@groupstudy.com>
Sent: Thursday, October 03, 2002 4:35 PM
Subject: RE: switch that can do rate limit
2950's can rate limit but it is only granular to the 1MB/sec level. The
3550 can rate limit in increments of 8k/sec.
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Desimone, Aurelio
Sent: Thursday, October 03, 2002 6:41 PM
To: 'Huy Luu'; ccielab@groupstudy.com
Subject: RE: switch that can do rate limit
I think 3550 with emi can do it (with a policy map)
-----Original Message-----
From: Huy Luu [mailto:hluu@veroxity.com]
Sent: Thursday, October 03, 2002 5:19 PM
To: ccielab@groupstudy.com
Subject: switch that can do rate limit
Hi all,
Is there any Cisco catalyst switches that can do rate-limiting on the
port
level? Can someone provide Catalyst model software that can support
this
feature?
Many thanks in advance
Huy Duc Luu
Veroxity Technology Partners
Fax 617-779-3099
Cell# (617) 293-0940
Email: hluu@veroxity.com
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3