From: Voss, David (dvoss@heidrick.com)
Date: Thu Sep 19 2002 - 10:34:24 GMT-3
I am creating a voice lab and wish to create a VoIP session in the following
manner:
Create a VoIP session to extension 900 via 129.9.1.1. If this phone is not
available, the session should then dial 129.9.2.2.
Here is what I've done so far:
dial-peer voice 1 pots
destination pattern 2222
port 2/0/0
dial-peer voice 2 pots
destination pattern 3333
port 2/0/1
Now, the problem... I don't have 129.9.x.x network in my routing tables, so
how am I supposed to create a call to these IP addresses? Should I used a
loopback or local port on my router?
Also, not sure how to have a second IP address act as backup to the first.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3