From: DBL (dlittlewood@totalise.co.uk)
Date: Thu Sep 19 2002 - 10:51:26 GMT-3
you need a voip dial peer
example.
dial-peer voice 3 voip
destination pattern 900
session target ipv4:129.9.1.1
you need to have ip connectivity to the remote router to make and receive
calls.
ta.
----- Original Message -----
From: "Voss, David" <dvoss@heidrick.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, September 19, 2002 2:34 PM
Subject: Voice Question
> I am creating a voice lab and wish to create a VoIP session in the
following
> manner:
>
> Create a VoIP session to extension 900 via 129.9.1.1. If this phone is
not
> available, the session should then dial 129.9.2.2.
>
> Here is what I've done so far:
>
> dial-peer voice 1 pots
> destination pattern 2222
> port 2/0/0
>
> dial-peer voice 2 pots
> destination pattern 3333
> port 2/0/1
>
> Now, the problem... I don't have 129.9.x.x network in my routing tables,
so
> how am I supposed to create a call to these IP addresses? Should I used a
> loopback or local port on my router?
>
> Also, not sure how to have a second IP address act as backup to the first.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3