From: Edward Monk (edmonk@attbi.com)
Date: Tue Sep 17 2002 - 13:34:13 GMT-3
Group,
I was going over the 3550 documentation to make sure I was familiar with
the similar functionality between it and a 5000.
I thought in order to make the 3550 act like a layer 2 device with only
CGMP all I had to do was enable it at the interface I wanted CGMP to run
on. After reading the documentation on this I am not so sure. I don't
have a 3550 to test this on so I am looking for someone to help me out
to either confirm or disprove what I was thinking.
The documentation says to only enable it on a layer 3 interface
connected to a layer 2 Catalyst switch? This is what has lead me to
question what I was thinking would be a compatible mode of operation.
This is found under the URL that follows in subsection "Enabling CGMP
Server Support".
Anyone have any ideas on this?
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550sc
g/swmcast.htm#97077
Thanks,
Ed
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:54 GMT-3