From: Wesley Thompson (W.Thompson@datatrac-dc.com)
Date: Wed Sep 04 2002 - 00:58:32 GMT-3
In addition to the interface commands you mentioned do you have a configuration similar to below on each router?
key chain test
key 1
key-string 0 password
-----Original Message-----
From: Kelly Cobean [mailto:kcobean@earthlink.net]
Sent: Tuesday, September 03, 2002 11:07 PM
To: ccielab
Subject: RIP v2 authentication
All,
I'm trying to use RIP v2 MD5 authentication and cannot seem to get it to
work. I'm doing one of the FatKid labs and I've matched the RIP
configuration that they list, but I continuously get the "invalid
authentication" message when debugging RIP. I've got version 2 specified on
both routers, and have the "ip rip auth mode md5" and "ip rip auth key test"
commands on the two joining interfaces, and I've got identical key-chains
configured on both routers....Am I missing anything? I've even tried
plain-text authentication and can't make it work. Thanks.
Kelly
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:43 GMT-3