From: Nigel Taylor (nigel_taylor@hotmail.com)
Date: Wed Sep 04 2002 - 00:52:03 GMT-3
Kelly,
What does the debug of the RIPv2 MD5 error look like? Trying
posting it (the debug of the authentication, I mean) to the list, I'm sure
someone have seen the error before and can let you know if you've missed
anything other than what you might have already covered.
Nigel
----- Original Message -----
From: "Kelly Cobean" <kcobean@earthlink.net>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, September 03, 2002 11:07 PM
Subject: RIP v2 authentication
> All,
> I'm trying to use RIP v2 MD5 authentication and cannot seem to get it
to
> work. I'm doing one of the FatKid labs and I've matched the RIP
> configuration that they list, but I continuously get the "invalid
> authentication" message when debugging RIP. I've got version 2 specified
on
> both routers, and have the "ip rip auth mode md5" and "ip rip auth key
test"
> commands on the two joining interfaces, and I've got identical key-chains
> configured on both routers....Am I missing anything? I've even tried
> plain-text authentication and can't make it work. Thanks.
>
> Kelly
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:43 GMT-3