From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Tue Aug 27 2002 - 00:32:44 GMT-3
Because I have no environment to configure that.
Could you please tell me why?
Thank you for help.
Best Wishes,
Peng Zheng
--- Brian McGahan <brian@cyscoexpert.com> wrote:
> Peng,
>
> You can't determine the requirements of the lab
> based on the
> configuration. Have you actually tried the lab? If
> so, what problems
> did you run into? Determining this should give you
> a better idea of how
> the specific configuration is used to solve the
> problems.
>
> HTH
>
> Brian McGahan, CCIE #8593
> Director of Design and Implementation
> brian@cyscoexpert.com
>
> CyscoExpert Corporation
> Internetwork Consulting & Training
> http://www.cyscoexpert.com
> Voice: 847.674.3392
> Fax: 847.674.2625
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Peng Zheng
> > Sent: Monday, August 26, 2002 8:57 PM
> > To: ccielab@groupstudy.com
> > Subject: distance under OSPF in cyscoexpert sample
> lab
> >
> > Hi,
> >
> > I didn't get the answer yet.
> > In R4 for cyscoexpert sample lab:
> > distance 171 0.0.0.0 255.255.255.255 1
> > has been configured under OSPF. I know it will set
> the
> > administrative distance for Ethernet 0 of R3 to
> 171.
> > But my question is why this configuration is
> required.
> > This configuration should be based on some
> > requirement in the lab. But I can not find where
> it
> > is.
> >
> >
> > Thank you for help.
> >
> > Best Wishes,
> > Peng Zheng
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:39 GMT-3