From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Tue Aug 27 2002 - 12:43:40 GMT-3
Because I have no environment at handy, could anyone
tell me why distance is required under OSPF on R4.
And why it has been set to 171? Is it special?
Thank you for help.
Best Wishes,
Peng Zheng
--- Brian McGahan <brian@cyscoexpert.com> wrote:
> Peng,
>
> You can't determine the requirements of the lab
> based on the
> configuration. Have you actually tried the lab? If
> so, what problems
> did you run into? Determining this should give you
> a better idea of how
> the specific configuration is used to solve the
> problems.
>
> HTH
>
> Brian McGahan, CCIE #8593
> Director of Design and Implementation
> brian@cyscoexpert.com
>
> CyscoExpert Corporation
> Internetwork Consulting & Training
> http://www.cyscoexpert.com
> Voice: 847.674.3392
> Fax: 847.674.2625
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Peng Zheng
> > Sent: Monday, August 26, 2002 8:57 PM
> > To: ccielab@groupstudy.com
> > Subject: distance under OSPF in cyscoexpert sample
> lab
> >
> > Hi,
> >
> > I didn't get the answer yet.
> > In R4 for cyscoexpert sample lab:
> > distance 171 0.0.0.0 255.255.255.255 1
> > has been configured under OSPF. I know it will set
> the
> > administrative distance for Ethernet 0 of R3 to
> 171.
> > But my question is why this configuration is
> required.
> > This configuration should be based on some
> > requirement in the lab. But I can not find where
> it
> > is.
> >
> >
> > Thank you for help.
> >
> > Best Wishes,
> > Peng Zheng
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:39 GMT-3