From: Brian McGahan (brian@xxxxxxxxxxxxxxx)
Date: Tue Aug 27 2002 - 00:18:41 GMT-3
Peng,
You can't determine the requirements of the lab based on the
configuration. Have you actually tried the lab? If so, what problems
did you run into? Determining this should give you a better idea of how
the specific configuration is used to solve the problems.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Peng Zheng
> Sent: Monday, August 26, 2002 8:57 PM
> To: ccielab@groupstudy.com
> Subject: distance under OSPF in cyscoexpert sample lab
>
> Hi,
>
> I didn't get the answer yet.
> In R4 for cyscoexpert sample lab:
> distance 171 0.0.0.0 255.255.255.255 1
> has been configured under OSPF. I know it will set the
> administrative distance for Ethernet 0 of R3 to 171.
> But my question is why this configuration is required.
> This configuration should be based on some
> requirement in the lab. But I can not find where it
> is.
>
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:38 GMT-3