From: K Sarangan (K.Sarangan@xxxxxxxxxxxxx)
Date: Sat Aug 17 2002 - 06:10:49 GMT-3
Hello All,
Iam doing bridging stuff. The set up is something like this.
R1(s0-130.100.12.1)-----------s0R2s1-----------------(s0-130.10
0.12.2)R3.
I dont have routers with 2 ethernet ports. So iam using serial of R2 interfaces
to do transparent bridging.
I have also put mac-address command on all the router serial interfaces. But st
ill iam unable to ping from R1 to
R3. If i give debug ip packet, packet is going outside R1 but not coming inside
R2. Nothing is in
sh ip arp.
Serial does not have a mac address. so R2 should take this as the mac addr and
store it.But this is happening.
Any clues?
TIA,
Sarangan.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3