From: Asim Khan (asimmegawatt@xxxxxxxxx)
Date: Fri Aug 16 2002 - 09:25:11 GMT-3
It is possible that you have older Rxboot image. You
have to check this from Cisco and upgrade it first
before loading the IOS in the flash.
--- atechi4life <atechi4life@yahoo.com> wrote:
> Hi guys,
>
> I tried changing the config regiser to 0x2101 then
> trying to load the ios
> but it still fails. I have pasted the error I get
> below. Your help is
> appreciated. Thanks
>
> Router(boot)#copy tftp flash
>
> System flash directory:
> No files in System flash
> [0 bytes used, 16777216 available, 16777216 total]
> Address or name of remote host [192.1.1.1]?
> Source file name? c2500-jos56i-l.121-4.bin
> Destination file name [c2500-jos56i-l.121-4.bin]?
> Accessing file 'c2500-jos56i-l.121-4.bin' on
> 192.1.1.1...
> Loading c2500-jos56i-l.121-4.bin from 192.1.1.1 (via
> Serial0): ! [OK]
>
> Device needs erasure before copying new file
> Erase flash device before writing? [confirm]
>
> Copy 'c2500-jos56i-l.121-4.bin' from server
> as 'c2500-jos56i-l.121-4.bin' into Flash WITH
> erase? [yes/no]yes
> Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
> ...NOT erased
> Copy aborted - erase failed
> ERR: 'c2500-jos56i-l.121-4.bin' open - device needs
> erasure
> Router(boot)#
>
> -----Original Message-----
> From: atechi4life [mailto:atechi4life@yahoo.com]
> Sent: Thursday, August 15, 2002 1:14 AM
> To: ccielab@groupstudy.com
> Subject: Upgrade Error
>
>
> Hi,
>
> I am trying to upgrade the ios on my router but I am
> unable to do it. It
> would start the process and abort after it confirms
> if I want to erase the
> ios before loading the new ios. I would get an abort
> error. Has anyone
> experience this problem before? The switch is a
> 2520. I upgrade the boot
> roms so I don't think that's the problem. Any
> suggestions?
>
> Trevor
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3