From: Tony H. (aamercado31@xxxxxxxxx)
Date: Sat Aug 10 2002 - 16:19:33 GMT-3
Not sure about this but you can try password recovery
via the aux port:
http://www.cisco.com/warp/public/779/smbiz/service/knowledge/general/recovery2.
htm
--- Asim Khan <asimmegawatt@yahoo.com> wrote:
> Hi all,
>
> I need an urgent help. The console port of my 2500
> series router is gone bad. There is no configuration
> in it. I tried to use the Aux port to get into it,
> but
> after getting the user mode it ask me to enter the
> enable password. Is there any way I can get into to
> the router through Aux port and configure it?
>
> TIA
>
> Asim Khan
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:22 GMT-3