From: Balaji Siva (bsivasub@xxxxxxxxx)
Date: Tue Aug 06 2002 - 22:00:29 GMT-3
you need to create separate BVI interface with its individual subnet ip
address for each vlan/bridge group
see example ( i didn't care about exact syntax)
in fa0
in fa 0.1
encapsulation isl 1
bridge-group 1
in fa 0.2
encapsultion isl 2
bridge-group 2
in fa 1
in fa 1.1
encapsulation isl 1
bridge-group 1
in fas 1.2
encapsulation isl 2
bridge-group 2
in bvi 1
ip address <vlan1 ip address>
in bvi2
ip address <vlan2 ip address>
bridge 1 route ip
bridge 1 protocol ieee
bridge 2 route ip
bridge 2 protocol ieee
balaji
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
EbonyGuru@aol.com
Sent: Tuesday, August 06, 2002 8:39 PM
To: bluspooky@yahoo.com; ccielab@groupstudy.com
Subject: Re: Quick IRB one.
Which vlan address will be assigned to the bvi interface?
I mean both vlans have separate ip nets not so?
or do you secondary address the bvi using addresses from both vlans?
TIA
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3