From: Mahesh Gupta (maheshng@xxxxxxxxx)
Date: Fri Aug 02 2002 - 03:05:18 GMT-3
Another good way to handle this situation will be to put restrictive dialer
list to deny all interesting traffic as .. dialer-list 10 protocol ip deny
... on both the ends. This will never reset the isdn link. connection is
established automatically by the loss of watched route from the routing
table.
I have tested the same and it works great !!!!
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ccie candidate
> Sent: Tuesday, July 30, 2002 9:32 AM
> To: 'ccie candidate'; ccielab@groupstudy.com; Joe
> Subject: RE: dialer watch keeps resetting the link
>
>
> You are the Man !!!
> i have never thought of the other end damn router ..this makes
> all sense man .
>
> i very much appreciate your help .........
>
> regards ;
>
>
>
>
>
> --
>
> On Mon, 29 Jul 2002 23:31:41
> Joe wrote:
> >Dialer watch is not resetting the link, the router on the other
> end is. Try
> >bumping up it's idle timer to a long value. This does not pose a problem
> >for dialerwatch because when the watched route returns dialer watch will
> >'nail' the link back down until the route disappears again.
> >
> >Joe
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> >ccie candidate
> >Sent: Sunday, July 28, 2002 5:28 AM
> >To: ccielab@groupstudy.com
> >Subject: dialer watch keeps resetting the link
> >
> >
> >folks ;
> >the dialer watch keeps resetting the link every "idle timeout "
> >it is supposed to recheck the link and if the primary is up
> ..the isdn link
> >remains up (is it this way) ..however the link every timeout
> goes down and
> >then comes up again .
> >
> >i removed ppp multilink ,dailer loadthreshold ..only one dialer watch
> >..however he problem remains ..
> >
> >i need help on this guys .
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3