From: ccie candidate (ccie1@xxxxxxxxx)
Date: Fri Aug 02 2002 - 10:50:19 GMT-3
i think this will not prevent the link from resetting :)
i guess the opposite might do .
the idea is that when the dialer watch bring up the link , every idle timeout i
t checks the status of the primary , if the primary is still done ..nothing sho
uld happen ,if it comes ..well it drops the isdn
now think of the other end router , when you deny all the traffic , the idle ti
meout will count down until it is zero , the router will drop the link , then t
he dialer watch router will bring it up again .
the solution is to increase the idle timeout on the other end ..that works grea
t for me and solved the problem
--On Fri, 2 Aug 2002 11:35:18 Mahesh Gupta wrote: >Another good way to handle this situation will be to put restrictive dialer >list to deny all interesting traffic as .. dialer-list 10 protocol ip deny >... on both the ends. This will never reset the isdn link. connection is >established automatically by the loss of watched route from the routing >table. > >I have tested the same and it works great !!!! > > > >> -----Original Message----- >> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >> ccie candidate >> Sent: Tuesday, July 30, 2002 9:32 AM >> To: 'ccie candidate'; ccielab@groupstudy.com; Joe >> Subject: RE: dialer watch keeps resetting the link >> >> >> You are the Man !!! >> i have never thought of the other end damn router ..this makes >> all sense man . >> >> i very much appreciate your help ......... >> >> regards ; >> >> >> >> >> >> -- >> >> On Mon, 29 Jul 2002 23:31:41 >> Joe wrote: >> >Dialer watch is not resetting the link, the router on the other >> end is. Try >> >bumping up it's idle timer to a long value. This does not pose a problem >> >for dialerwatch because when the watched route returns dialer watch will >> >'nail' the link back down until the route disappears again. >> > >> >Joe >> > >> >-----Original Message----- >> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >> >ccie candidate >> >Sent: Sunday, July 28, 2002 5:28 AM >> >To: ccielab@groupstudy.com >> >Subject: dialer watch keeps resetting the link >> > >> > >> >folks ; >> >the dialer watch keeps resetting the link every "idle timeout " >> >it is supposed to recheck the link and if the primary is up >> ..the isdn link >> >remains up (is it this way) ..however the link every timeout >> goes down and >> >then comes up again . >> > >> >i removed ppp multilink ,dailer loadthreshold ..only one dialer watch >> >..however he problem remains .. >> > >> >i need help on this guys . >> > >> > >> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3