From: ccie candidate (ccie1@xxxxxxxxx)
Date: Fri Aug 02 2002 - 11:46:37 GMT-3
as long as i increased the idle timout on the remote router ...it worked perfe
ctly ...i checked it
--On Fri, 2 Aug 2002 20:09:03 Mahesh Gupta wrote: >did you check it ?? I would say test it out... It was also surprised as how >this statement can make it work like this....:-) > >> -----Original Message----- >> From: ccie candidate [mailto:ccie1@lycos.com] >> Sent: Friday, August 02, 2002 7:20 PM >> To: ccie candidate; ccielab@groupstudy.com; Joe; Mahesh Gupta >> Subject: RE: dialer watch keeps resetting the link >> >> >> i think this will not prevent the link from resetting :) >> i guess the opposite might do . >> the idea is that when the dialer watch bring up the link , every >> idle timeout it checks the status of the primary , if the primary >> is still done ..nothing should happen ,if it comes ..well it >> drops the isdn >> >> now think of the other end router , when you deny all the traffic >> , the idle timeout will count down until it is zero , the router >> will drop the link , then the dialer watch router will bring it up again . >> >> >> the solution is to increase the idle timeout on the other end >> ..that works great for me and solved the problem >> >> >> >> >> >> -- >> >> On Fri, 2 Aug 2002 11:35:18 >> Mahesh Gupta wrote: >> >Another good way to handle this situation will be to put >> restrictive dialer >> >list to deny all interesting traffic as .. dialer-list 10 >> protocol ip deny >> >... on both the ends. This will never reset the isdn link. connection is >> >established automatically by the loss of watched route from the routing >> >table. >> > >> >I have tested the same and it works great !!!! >> > >> > >> > >> >> -----Original Message----- >> >> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >> >> ccie candidate >> >> Sent: Tuesday, July 30, 2002 9:32 AM >> >> To: 'ccie candidate'; ccielab@groupstudy.com; Joe >> >> Subject: RE: dialer watch keeps resetting the link >> >> >> >> >> >> You are the Man !!! >> >> i have never thought of the other end damn router ..this makes >> >> all sense man . >> >> >> >> i very much appreciate your help ......... >> >> >> >> regards ; >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> On Mon, 29 Jul 2002 23:31:41 >> >> Joe wrote: >> >> >Dialer watch is not resetting the link, the router on the other >> >> end is. Try >> >> >bumping up it's idle timer to a long value. This does not >> pose a problem >> >> >for dialerwatch because when the watched route returns dialer >> watch will >> >> >'nail' the link back down until the route disappears again. >> >> > >> >> >Joe >> >> > >> >> >-----Original Message----- >> >> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >> >> >ccie candidate >> >> >Sent: Sunday, July 28, 2002 5:28 AM >> >> >To: ccielab@groupstudy.com >> >> >Subject: dialer watch keeps resetting the link >> >> > >> >> > >> >> >folks ; >> >> >the dialer watch keeps resetting the link every "idle timeout " >> >> >it is supposed to recheck the link and if the primary is up >> >> ..the isdn link >> >> >remains up (is it this way) ..however the link every timeout >> >> goes down and >> >> >then comes up again . >> >> > >> >> >i removed ppp multilink ,dailer loadthreshold ..only one dialer watch >> >> >..however he problem remains .. >> >> > >> >> >i need help on this guys . >> >> > >> >> > >> >> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3