RE: vlan config

From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Tue Jul 23 2002 - 16:52:54 GMT-3

• Next message: Colin Barber: "RE: Serial Number Retrieval"
• Previous message: Dennis Hartmann: "MPLS/Feature Navigator"
• Maybe in reply to: Ajit Das: "vlan config"
• Next in thread: ccie candidate: "Re: vlan config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You would need to configure trunk links on the Cat for the FE and GE ports.
You can use either ISL or dot1q (depending on the switch).

-----Original Message-----
From: Ajit Das [mailto:ajidas@cisco.com]
Sent: 23 July 2002 18:06
To: ccielab@groupstudy.com
Subject: vlan config

Hi All,

I would like to configure vlan between 3600 and 7200 router as shown
below.

3640-----catalyst5k----7200

There are 4 FE cards which connects to 4 FE ports on catalyst5k.
The link between catalyst and 7200 is GigE.

The requirement is to configure 5 vlans in each FE on 3640 and they will
map 1-to-1 at GigE on 7200.
I am able to configure 5 vlans in each FE port on 3640. and 20 vlans on
7200. Do I have to configure trunk between 7200 and catalyst. Can some
one shed light on config at catalyst switch.

Thanks in advance.

Thanks
AD

• Next message: Colin Barber: "RE: Serial Number Retrieval"
• Previous message: Dennis Hartmann: "MPLS/Feature Navigator"
• Maybe in reply to: Ajit Das: "vlan config"
• Next in thread: ccie candidate: "Re: vlan config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3