From: Dennis Hartmann (sanester8@xxxxxxxxx)
Date: Tue Jul 23 2002 - 15:48:08 GMT-3
Use the Feature Navigator. MPLS is only supported
on the Enterprise and Service Provider Feature Sets.
If your router doesn't support CEF switching, you can
forget about running MPLS or NBAR (QoS). You need at
least a 2600 router.
Feature Navigator: www.cisco.com/go/fn
Dennis Hartmann
Instructor/Consultant
dh8@pobox.com
--- Paul Jin <PJin@EIGRP.Org> wrote:
> What type of router are you using to run mpls?
>
> It is not supported on the lower/older routers.
>
> - Paul
>
>
> -----Original Message-----
> From: Todd Carswell [mailto:acarswell@nc.rr.com]
> Sent: Monday, July 22, 2002 11:21 AM
> To: ccielab@groupstudy.com
> Subject: OT - MPLS capabilities in IOS
>
> All,
>
> I'm currently running IOS 12.1(5)T9, but it doesn't
> seem to have MPLS
> capabilities. I get the "unrecognized command"
> output from the CLI when
> I try to type in the basic "tag switching" commands.
>
> Here's my question: Does IOS 12.1.16 with the
> "Service Provider" feature
> set allow full MPLS functionality?
>
> I've searched the cisco web site for the answer, but
> I haven't had any
> luck yet.
>
> Before anyone sends any flames my way... I know that
> MPLS is not on the
> R&S lab exam. That's why I designated this message
> as OT.
>
> Thx
>
> Todd Carswell
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3