From: Brian McGahan (brian@xxxxxxxxxxxxxxx)
Date: Tue Jul 16 2002 - 14:28:48 GMT-3
Osindero,
Check all these issues first:
http://www.cisco.com/warp/public/104/26.html
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
beda jain
Sent: Tuesday, July 16, 2002 10:33 AM
To: Ademola Osindero; ccielab@groupstudy.com
Subject: Re: ospf routes in database not in route table
there may two issue.
1. Forwarding address for external route
2. network mismatch in your frame relay link
Thanks,
Beda
At 12:06 AM 7/16/2002 +0100, Ademola Osindero wrote:
>Hi group,
>
>Can there be any reason why a route existing in an OSPF database will
not
>be installed in the route table?
>
>While practicing Cyscoexeprt lab, I mad routers r2, r5 and r6 to have
ip
>ospf net non-broadcast and also configured there neighbors' addresses.
This
>was all in the quest to modify the dead interval to 120seconds. But
>apparently no ospf route was installed on r2 except for routes
emanating
>from r1. Could there be any reason for this?
>
>Regards,
>
>Osindero Ademola
>Schlumberger Network Solutions
>Tel: 234 1 261 0446 Ext 5427
>Fax 234 1 262 1034
>email:osindero@lagos.sns.slb.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:32 GMT-3