From: david (barbedwireblack@xxxxxxxxx)
Date: Fri Jul 12 2002 - 18:21:01 GMT-3
That's cool.
but i was looking for a software package or
something.
Currently we use Kiwi-Cat Tools but
it is inconsistent and we frequently have 50%
failure rates that turn out to be false alarms.
Surely someone has a program that
can test ISDN Dial Backup and return
the results for 100+ sites.
ANYBODY?
> Performing Loopback Calls to Test BRI Circuits
>
>
http://www.cisco.com/warp/customer/471/bri_loopback_call.html
>
> What about doing profiles, and setting a particular
> network/profiles
> to do testing, so a ping to the remote will test if
> the circuit
> is able to dial, etc, etc.
>
> I.e.
> int serial 0
> ip add mainnet.1
> backup dialer 1
> int dialer 1
> ip add backupnet.1
> dialer string 555-1212
> int dialer 2
> ip add testnet.1
> dialer string 555.1212
>
> Just an idea...
>
>
> david wrote:
> >
> > I'm sure someone out there is using some
> > form of automated procedure for periodically
> > testing their ISDN backup lines.
> >
> > I can't find any "cheap" solutions for doing this.
> >
> > All we need to do is verify that our ISDN Backup
> > is functioning properly on a reocurring time
> table.
> >
> > Anybody have some suggestions?
> >
> > thanks,
> > david
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:28 GMT-3