From: xje (jiaoerxu@xxxxxxxxxxxxx)
Date: Mon Jul 01 2002 - 22:15:00 GMT-3
----- Original Message -----
From: "lrlab" <lrlab@swbell.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 02, 2002 2:38 AM
Subject: OSPF Demand Circuit/PPP Multilink/Dialer Profile
I think you must use bandwidth command below the interface dialer1
> Group:
>
> Any idea why a OSPF deman circuit would work fine until I added ppp multi
and
> dialer load 1 at the dialer on both ends. Once I do that the link flaps.
> Removed the lines from both and it returns to a normal (working) state.
When
> I do the debug IP OSPF mon I see the lsa. I have added the no peer nei at
> both ends. here are the affested part of the configs from both without the
ppp
> multi and dialer load 1.
>
>
> r3#sh run
> hostname r3
>
> username r6 password 0 cisco
>
> interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0555100001
> isdn spid2 0555300001
> ppp authentication chap
> !
> interface Dialer1
> ip address 15.15.15.2 255.255.255.0
> encapsulation ppp
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 cisco
> dialer pool 1
> dialer remote-name r6
> dialer idle-timeout 45
> dialer string 5552000
> dialer-group 1
> no peer neighbor-route
> ppp authentication chap
> !
> router ospf 10
> router-id 3.3.3.3
> log-adjacency-changes
> area 1 stub no-summary
> network 15.15.15.2 0.0.0.0 area 1
> network 150.100.4.3 0.0.0.0 area 1
>
> !
> access-list 100 permit ip any any
> dialer-list 1 protocol ip list 100
>
>
>
> r6#sh run
> hostname r6
>
> username r3 password 0 cisco
> isdn switch-type basic-ni
> !
> interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0555200001
> isdn spid2 0555400001
> ppp authentication chap
> !
> interface Dialer1
> ip address 15.15.15.1 255.255.255.0
> encapsulation ppp
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 cisco
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name r3
> dialer idle-timeout 45
> dialer string 5551000
> dialer-group 1
> no peer neighbor-route
> ppp authentication chap
> !
> router ospf 10
> router-id 6.6.6.6
> log-adjacency-changes
> area 0 authentication message-digest
> area 1 stub no-summary
> passive-interface Serial0
> network 15.15.15.1 0.0.0.0 area 1
> network 150.100.2.1 0.0.0.0 area 0
> network 150.100.4.1 0.0.0.0 area 1
> network 150.100.50.41 0.0.0.0 area 2
> !
> ip classless
> ip http server
> !
> access-list 100 permit ip any any
> dialer-list 1 protocol ip list 100
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3