From: Carlos G Mendioroz (tron@xxxxxxxxxxx)
Date: Tue Jul 02 2002 - 21:38:35 GMT-3
AFAIK, this configuration does not work.
I would love to be wrong... anyone interested in labbing it out and post
working configs ?
Please ? :-)
-Carlos
P.S.
-It is considered cheating to filter out OSPF from the ISDN link.
-I've been told of a "workarround" solution that I'm sure the owner
of the idea will share if no-one comes with a real working config...
xje wrote:
>
> ----- Original Message -----
> From: "lrlab" <lrlab@swbell.net>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, July 02, 2002 2:38 AM
> Subject: OSPF Demand Circuit/PPP Multilink/Dialer Profile
>
> I think you must use bandwidth command below the interface dialer1
>
> > Group:
> >
> > Any idea why a OSPF deman circuit would work fine until I added ppp multi
> and
> > dialer load 1 at the dialer on both ends. Once I do that the link flaps.
> > Removed the lines from both and it returns to a normal (working) state.
> When
> > I do the debug IP OSPF mon I see the lsa. I have added the no peer nei at
> > both ends. here are the affested part of the configs from both without the
> ppp
> > multi and dialer load 1.
> >
> >
> > r3#sh run
> > hostname r3
> >
> > username r6 password 0 cisco
> >
> > interface BRI0
> > no ip address
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0555100001
> > isdn spid2 0555300001
> > ppp authentication chap
> > !
> > interface Dialer1
> > ip address 15.15.15.2 255.255.255.0
> > encapsulation ppp
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 cisco
> > dialer pool 1
> > dialer remote-name r6
> > dialer idle-timeout 45
> > dialer string 5552000
> > dialer-group 1
> > no peer neighbor-route
> > ppp authentication chap
> > !
> > router ospf 10
> > router-id 3.3.3.3
> > log-adjacency-changes
> > area 1 stub no-summary
> > network 15.15.15.2 0.0.0.0 area 1
> > network 150.100.4.3 0.0.0.0 area 1
> >
> > !
> > access-list 100 permit ip any any
> > dialer-list 1 protocol ip list 100
> >
> >
> >
> > r6#sh run
> > hostname r6
> >
> > username r3 password 0 cisco
> > isdn switch-type basic-ni
> > !
> > interface BRI0
> > no ip address
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0555200001
> > isdn spid2 0555400001
> > ppp authentication chap
> > !
> > interface Dialer1
> > ip address 15.15.15.1 255.255.255.0
> > encapsulation ppp
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 cisco
> > ip ospf demand-circuit
> > dialer pool 1
> > dialer remote-name r3
> > dialer idle-timeout 45
> > dialer string 5551000
> > dialer-group 1
> > no peer neighbor-route
> > ppp authentication chap
> > !
> > router ospf 10
> > router-id 6.6.6.6
> > log-adjacency-changes
> > area 0 authentication message-digest
> > area 1 stub no-summary
> > passive-interface Serial0
> > network 15.15.15.1 0.0.0.0 area 1
> > network 150.100.2.1 0.0.0.0 area 0
> > network 150.100.4.1 0.0.0.0 area 1
> > network 150.100.50.41 0.0.0.0 area 2
> > !
> > ip classless
> > ip http server
> > !
> > access-list 100 permit ip any any
> > dialer-list 1 protocol ip list 100
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:17 GMT-3