From: Krucker, Louis (louis.krucker@xxxxxxxxxxx)
Date: Sat Jun 29 2002 - 16:52:00 GMT-3
Hi
You need ppp multilink as well. There was an old feature called BOD
bandwith on demand and for that you dont need ppp multilink but this
feature is not supported anymore by ciso.
http://www.cisco.com/warp/customer/793/access_dial/bri_isdn_11049.html
rgds
Louis
-----Original Message-----
From: Carlos G Mendioroz
To: Groupstudy ccielab list
Sent: 29.06.2002 19:59
Subject: ISDN & ppp multilink things...
Hi,
just going over ISDN things, some I have not been able to clarify:
-using load-threshold, you can bring 2 (or more?) B channels into
a link using ppp but without ppp multilink. What's the protocol used
then ?
-when MPP is used, a virtual-access interface is created and the info on
seconds left and seconds idle from "show isdn active" vanishes...
How do you see that info ?
TIA,
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3