From: Carlos G Mendioroz (tron@xxxxxxxxxxx)
Date: Sat Jun 29 2002 - 17:00:58 GMT-3
Well, supported or not, it works.
Do you have any link that documents that BOD is not supported ?
"Krucker, Louis" wrote:
>
> Hi
>
> You need ppp multilink as well. There was an old feature called BOD
> bandwith on demand and for that you dont need ppp multilink but this
> feature is not supported anymore by ciso.
>
> http://www.cisco.com/warp/customer/793/access_dial/bri_isdn_11049.html
>
> rgds
> Louis
>
> -----Original Message-----
> From: Carlos G Mendioroz
> To: Groupstudy ccielab list
> Sent: 29.06.2002 19:59
> Subject: ISDN & ppp multilink things...
>
> Hi,
> just going over ISDN things, some I have not been able to clarify:
>
> -using load-threshold, you can bring 2 (or more?) B channels into
> a link using ppp but without ppp multilink. What's the protocol used
> then ?
>
> -when MPP is used, a virtual-access interface is created and the info on
>
> seconds left and seconds idle from "show isdn active" vanishes...
> How do you see that info ?
>
> TIA,
> --
> Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3