From: Ahmed Al-Ghawas (ghawas@xxxxxxxxxxxxxx)
Date: Sat Jun 29 2002 - 16:36:50 GMT-3
Guys,
I am really getting confused!
>From what I understood from "CCIE Practical Studies" book that when using the
network command, that you ought to be precise in the extent that you would add
the interface ip address and not advertise the whole subnet mask!
For example:
R1
S0:10.1.128.1/24
|
|
S0:10.1.128.2/24
R2
S1:10.1.80.1/24
|
|
S1:10.1.80.3/24
R3
R1 config:
router ospf 2001
network 10.1.128.1 0.0.0.0 area x (and not; network 10.1.128.0 0.0.0.255 area
x!!)
R2 config:
router ospf 2001
network 10.1.128.2 0.0.0.0 area x (and not; network 10.1.128.0 0.0.0.255 area
x!!)
network 10.1.80.1 0.0.0.0 area x (and not; network 10.1.80.0 0.0.0.255 area
x!!)
R3 config:
router ospf 2001
network 10.1.80.3 0.0.0.0 area x (and not; network 10.1.80.0 0.0.0.255 area
x!!)
I really need to stick to one concept and understand why this book doest it
differently then the other and avoid loosing marks for such stupid thing in
the real lab!!
Any input is much appreciated
Ahmed
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3