From: P729 (p729@xxxxxxx)
Date: Sat Jun 29 2002 - 14:39:16 GMT-3
I should have said "routers belonging to the same area have, for that area,
identical area link-state databases."
Sorry for my error.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "P729" <p729@cox.net>
To: "Peng Zheng" <zpnist@yahoo.com>; <ccielab@groupstudy.com>
Sent: Friday, June 21, 2002 5:39 PM
Subject: Re: Process ID selection in OSPF
> There is no AS indication because it isn't relevant. The contents of the
> synchronized database is what's relevant. Those routers that share the
same
> synchronized database are part of the same autonomous system, regardless
of
> the locally assigned process ID.
>
> Regards,
>
> Mas Kato
> https://ecardfile.com/id/mkato
> ----- Original Message -----
> From: "Peng Zheng" <zpnist@yahoo.com>
> To: "P729" <p729@cox.net>; <ccielab@groupstudy.com>
> Sent: Friday, June 21, 2002 5:06 PM
> Subject: Re: Process ID selection in OSPF
>
>
> > But how the router can decide whether other OSPF
> > speaking router are in same autonumous system or not.
> > Because there is no autonumous system indication. Is
> > there some example two or more process id are configed
> > on one router.
> >
> >
> > --- P729 <p729@cox.net> wrote:
> > > 'show ip ospf database' will dump the link-state
> > > database for each process
> > > ID. The router IDs under each process will give an
> > > indication of what makes
> > > up that autonomous system. An OSPF-speaking router
> > > implements a unique RID
> > > for each AS it participates in (each OSPF process).
> > >
> > > Regards,
> > >
> > > Mas Kato
> > > https://ecardfile.com/id/mkato
> > > ----- Original Message -----
> > > From: "Peng Zheng" <zpnist@yahoo.com>
> > > To: <p729@cox.net>; <ccielab@groupstudy.com>
> > > Sent: Friday, June 21, 2002 12:22 PM
> > > Subject: Re: Process ID selection in OSPF
> > >
> > >
> > > > Dear Sir,
> > > >
> > > > But I have another question. Since process ID
> > > number
> > > > is completely arbitrary, how can I decide whether
> > > > routers belong to same Autonamous System or not.
> > > >
> > > >
> > > > Thank you for help.
> > > >
> > > > Best Regards,
> > > > Peng Zheng
> > > > --- p729@cox.net wrote:
> > > > > The OSPF process ID number is completely
> > > arbitrary
> > > > > and only locally significant. It's used for
> > > > > distinguishing between different OSPF processes
> > > > > running on the same router.
> > > > >
> > > > > Regards,
> > > > >
> > > > > Mas Kato
> > > > > https://ecardfile.com/id/mkato
> > > > >
> > > >
> > >
> > ============================================================
> > > > > From: Peng Zheng <zpnist@yahoo.com>
> > > > > Date: 2002/06/20 Thu PM 04:50:13 EDT
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: Process ID selection in OSPF
> > > > >
> > > > > Hi,
> > > > >
> > > > > I tried to use the Cisco Interactive Mentor, I
> > > > > noticed they use different process ID on
> > > different
> > > > > router. Is there any benefit in this kind of
> > > > > configuration?
> > > > >
> > > > >
> > > > > Thank you for help.
> > > > >
> > > > > Best Regards,
> > > > > Peng Zheng
> > > > >
> > > > >
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3