RE: Load blance

From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Fri Jun 28 2002 - 07:34:06 GMT-3

• Next message: duan: "netbios input-access-filter"
• Previous message: chenyan: "how do i can see the numbers of dram?"
• Maybe in reply to: Tom Young: "Load blance"
• Next in thread: Saher A Ishak: "Re: Load blance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Tom,

All IGP's will automatically load balance between equal cost paths (BGP not
included) up to 4 different paths.

IGRP & EIGRP can load balance between Unequal cost paths if you use
"Maximun-paths" command along with "Varaince" under router process mode

HTH

Yakout

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Tom
Young
Sent: Friday, June 28, 2002 7:45 PM
To: ccielab@groupstudy.com
Subject: Load blance

Forgive me to ask a very simple quesion about load blance,
if I don't config anything , which one protocol could do
the load balance automaticly. The RIP, IGRP,RIGRP, OSPF
and BGP.
If I do some config , such as policy-routing. All of that
protocols could do the load blance, right?

Thanks alot

• Next message: duan: "netbios input-access-filter"
• Previous message: chenyan: "how do i can see the numbers of dram?"
• Maybe in reply to: Tom Young: "Load blance"
• Next in thread: Saher A Ishak: "Re: Load blance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3