netbios input-access-filter

From: duan (duan@xxxxxxxxxxxxxx)
Date: Fri Jun 28 2002 - 07:55:45 GMT-3

• Next message: Ahmed Al-Ghawas: "Frame relay static maps"
• Previous message: yakout esmat: "RE: Load blance"
• Next in thread: Edward Monk: "RE: netbios input-access-filter"
• Maybe reply: Edward Monk: "RE: netbios input-access-filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi
   i'm confused with netbios host filter because i know little of netbios.the s
ituation like this ,three host A ,B,C attached with tokenring 0/0,i want the on
ly A and B can be access from other RSRB end .cisco CD can give configuration l
ike follow

   netbios access-list host filter1 permit A
   netbios access-list host filter1 permit B

  interface tokenring0/0
   netbios input-access-filter filet1 ! why not netbios output-access-filter

why it's input-access-filter instead of output-access-filter. I think that 'net
bios output-access-filter filet1' is more reasonable
.
  please give some reason why input not output

thanks in advance

• Next message: Ahmed Al-Ghawas: "Frame relay static maps"
• Previous message: yakout esmat: "RE: Load blance"
• Next in thread: Edward Monk: "RE: netbios input-access-filter"
• Maybe reply: Edward Monk: "RE: netbios input-access-filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3