From: Jerry Haverkos (jhaverkos@xxxxxxxxxxxxxxx)
Date: Tue Jun 25 2002 - 19:06:05 GMT-3
Jaspreet
Depending on the circumstances, the following also work:
Use a loopback interface, define the ip address as a host in the network you
need to summarize, put the loopbacks address in a non-backbone area and then
use the area range command to create the null route.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jaspreet Bhatia
Sent: Tuesday, June 25, 2002 1:31 PM
To: ccielab@groupstudy.com
Subject: AREA 0 RANGE COMMAND
>Hello Folks,
> I am about three weeks away from my lab exam and
> should not be discovering new things right now but to my surprise , while
> I was doing lab 22 , I had to get some OSPF routes summarized to /24 to
> allow them to get into the IGRP domain, but the problem was that the
> routes belonged to area 0 and I was under the impression that area 0
> routes cannot be summarized but I did area 0 range and I got the null0
> route and the IGRP domain got the routes . Can anyone help me understand
> when teh area 0 range command will work and when it will not work .Thanks
>
>Jaspreet
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:41 GMT-3