From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Tue Jun 25 2002 - 16:25:56 GMT-3
supposedly, it should only work on the abr
At 01:54 PM 6/25/2002 -0400, Bezverkhi, Serguei wrote:
>I was under the same impression too, but recently I had some cases where
>area 0 range worked just fine. Unfortunately I did not have a chance to
>figure out why it did not work in other cases...
>
>This message I guess is not too helpful to you, but you should know that
>it is working and it is not against any rules.
>
>Regards
>
>Serguei
>
>-----Original Message-----
>From: Jaspreet Bhatia [mailto:jasbhati@cisco.com]
>Sent: June 25, 2002 1:31 PM
>To: ccielab@groupstudy.com
>Subject: AREA 0 RANGE COMMAND
>
>
> >Hello Folks,
> > I am about three weeks away from my lab exam
> >and
> > should not be discovering new things right now but to my surprise ,
>while
> > I was doing lab 22 , I had to get some OSPF routes summarized to /24
>to
> > allow them to get into the IGRP domain, but the problem was that the
> > routes belonged to area 0 and I was under the impression that area 0
> > routes cannot be summarized but I did area 0 range and I got the
>null0
> > route and the IGRP domain got the routes . Can anyone help me
>understand
> > when teh area 0 range command will work and when it will not work
>.Thanks
> >
> >Jaspreet
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:41 GMT-3