From: Shane Miles (smiles@xxxxxxxxxx)
Date: Tue Jun 25 2002 - 16:51:32 GMT-3
If you look at the example configs here you'll see Cisco implicitly states
that it works.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
/ipcprt2/1cdospf.htm
-----Original Message-----
From: Reggie Terrell
To: Jaspreet Bhatia
Cc: ccielab@groupstudy.com
Sent: 6/25/02 1:42 PM
Subject: Re: AREA 0 RANGE COMMAND
Jaspreet,
I got the same thing, and it's the first time I've seen it. It must be
the
version or rev. My advice to keep in the back of your mind would still
be to
have the summary-address command ready if area 0 .... doesn't work.
Hope this helps,
Reggie
Jaspreet Bhatia wrote:
> >Hello Folks,
> > I am about three weeks away from my lab
exam and
> > should not be discovering new things right now but to my surprise ,
while
> > I was doing lab 22 , I had to get some OSPF routes summarized to /24
to
> > allow them to get into the IGRP domain, but the problem was that the
> > routes belonged to area 0 and I was under the impression that area 0
> > routes cannot be summarized but I did area 0 range and I got the
null0
> > route and the IGRP domain got the routes . Can anyone help me
understand
> > when teh area 0 range command will work and when it will not work
.Thanks
> >
> >Jaspreet
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:41 GMT-3