From: Treptow, Georg (gxtrept@xxxxxxxxx)
Date: Mon Jun 24 2002 - 20:35:31 GMT-3
What is the network portion of the IPX SAP address that you are trying to
advertise? If it is the same as the ethernet segment split horizion will
deny all SAP updates to R1. Use " debug ipx sap ? " and see if it is
skipping the advertisement.
Georg
-----Original Message-----
From: Michael Popovich [mailto:m.popovich@mchsi.com]
Sent: Monday, June 24, 2002 5:43 PM
To: CCIE GROUPSTUDY
Subject: IPX Issue
I am just setting up a basic IPX network.
R1-----Ethernet-----R2
Running IPX EIGRP.
R1 has IPX servers defined but they do not show up on R2, but routing is
working fine.
Not sure what the issue is here.
TIA
MP
Output from R1:
r1#sh ipx servers
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + =
detail
U - Per-user static
2 Total IPX Servers
Table ordering is based on routing and server info
Type Name Net Address Port Route
Hops Itf
S 4 PRINTER1 100.0004.0004.0004:000F conn 5
Et1/0
S 7 SERVER1 100.0005.0005.0005:000F conn 5
Et1/0
r1#sx
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses, U - Per-user static/Unknown, H - Hold-down
8 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
No default route known.
L 1 is the internal network
C 100 (NOVELL-ETHER), Et1/0
E 2 [45867776/1] via 100.00d0.ba21.a280, age 00:12:59,
1u, Et1/0
E 5 [46379776/1] via 100.00d0.ba21.a280, age 00:02:40,
1u, Et1/0
E 6 [46379776/1] via 100.00d0.ba21.a280, age 00:02:09,
1u, Et1/0
E 7 [46382336/1] via 100.00d0.ba21.a280, age 00:02:54,
1u, Et1/0
E 400 [20537600/0] via 100.00d0.ba21.a280, age 00:03:04,
1u, Et1/0
E 500 [20540160/0] via 100.00d0.ba21.a280, age 00:02:40,
1u, Et1/0
Output from R2:
r2#show ipx server
r2#sx
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses, U - Per-user static/Unknown, H - Hold-down
8 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
No default route known.
L 2 is the internal network
C 100 (NOVELL-ETHER), Et0/0
C 400 (FRAME-RELAY), Se0/0.256
E 1 [45867776/1] via 100.0007.5080.8291, age 00:15:01,
1u, Et0/0
E 5 [46354176/1] via 400.0005.0005.0005, age 00:04:08,
1u, Se0/0.256
E 6 [46354176/1] via 400.0006.0006.0006, age 00:04:07,
1u, Se0/0.256
E 7 [46356736/1] via 400.0005.0005.0005, age 00:04:08,
1u, Se0/0.256
E 500 [20514560/0] via 400.0005.0005.0005, age 00:04:08,
31u, Se0/0.256
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:41 GMT-3