From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Fri Jun 21 2002 - 19:57:58 GMT-3
Hi,
I'm wondering if anyone once use Cisco Interactive
Mentor, multiprotocol challenge 3.0.
I tried to configure NAT according to solution,
When I finished, I click the check config button, it
said it's not correct, but I can't find any difference
between my config and the solution.
Here is my config:
In CAT5k:
I added one line:
set interface sc0 2 10.10.10.100 255.255.255.0
10.10.10.255
On r1:
Under global Config:
I added:
ip nat translation timeout 180
ip nat pool anyname 130.10.7.1 130.10.7.14
prefix-length 28
ip nat inside source list 1 pool anyname overload
access-list 1 permit 10.10.10.0 0.0.0.255
Under Interface e0, I added:
ip address 10.10.10.1 255.255.255.0 secondary
ip nat inside
Under Interface s0 and s1, I added:
ip nat outside
I can't find what wrong with it.
If anyone knows, please tell me.
Thank you for help.
Best Regards,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:39 GMT-3