From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Mon Jun 24 2002 - 16:49:51 GMT-3
Hi,
I tested it today. In the solution, there is no this
configuration. Anyway, I tried it, but it still didn't
work when I click "Check Configuration".
What's the problem?
Has anyone tested this configuration?
Thank you for help.
Best Regards,
Peng Zheng
--- Danny.Wang@alderwoods.com wrote:
>
> @cat5k to add
>
> set ip route 0.0.0.0 10.10.10.1
>
>
>
>
>
> Peng Zheng
>
>
> <zpnist@yahoo.com To:
>
>
> > cc:
>
>
> Sent by:
> Subject: Cisco Interactive Mentor
>
> nobody@groupstudy
>
>
> .com
>
>
>
>
>
>
>
>
> 06/21/2002 03:57
>
>
> PM
>
>
> Please respond to
>
>
> Peng Zheng
>
>
>
>
>
>
>
>
>
>
>
>
> Hi,
>
> I'm wondering if anyone once use Cisco Interactive
> Mentor, multiprotocol challenge 3.0.
>
> I tried to configure NAT according to solution,
> When I finished, I click the check config button,
> it
> said it's not correct, but I can't find any
> difference
> between my config and the solution.
>
> Here is my config:
>
> In CAT5k:
> I added one line:
>
> set interface sc0 2 10.10.10.100 255.255.255.0
> 10.10.10.255
>
> On r1:
>
> Under global Config:
>
> I added:
>
> ip nat translation timeout 180
> ip nat pool anyname 130.10.7.1 130.10.7.14
> prefix-length 28
> ip nat inside source list 1 pool anyname overload
>
> access-list 1 permit 10.10.10.0 0.0.0.255
>
> Under Interface e0, I added:
>
> ip address 10.10.10.1 255.255.255.0 secondary
> ip nat inside
>
> Under Interface s0 and s1, I added:
>
> ip nat outside
>
>
> I can't find what wrong with it.
> If anyone knows, please tell me.
>
> Thank you for help.
>
>
> Best Regards,
> Peng Zheng
>
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3