From: fningham@xxxxxxx
Date: Tue Jun 11 2002 - 14:11:06 GMT-3
Tunnel has different IPX networks on r2 and r3. Should
be the same network. e.g. change the ipx network on r3
Tu0 to 22 and include under eigrp. Also on r3 put a no
network 22 under ipx router rip.
Cheers, Fred
> Hi,
>
> I would wonder if anyone have a unique trick of getting ipx eigrp to
> work over GRE tunnel or over ppp. I am not having any luck getting it to
> work at all, appreciate if a sample config is display.
>
> Thanks in advanced.
>
> Tu
>
> Here is mine version, but it's not working.
>
> R2
>
> !
> ipx routing 00b0.6491.ae01
> !
> interface Tunnel0
> no ip address
> ip mtu 1440
> ipx network 22
> tunnel source 20.0.0.2
> tunnel destination 30.0.0.3
> !
> ipx router eigrp 90
> network 22
> !
> ipx router rip
> no network 22
> !
>
> R3
> ipx routing 0004.c135.ece0
> !
> interface Tunnel0
> no ip address
> ip mtu 1440
> ipx network 33
> tunnel source 30.0.0.3
> tunnel destination 20.0.0.2
> !
> ipx router eigrp 90
> network 33
> !
>
> I have also configures the ipx eigrp for the serial interface, which is
> a back-to-back T1(ppp) link between the two routers but still not
> working.
>
> R3
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JK9O3S-M), Version 12.2(7b), RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Tue 05-Mar-02 07:44 by pwade
> Image text-base: 0x80008088, data-base: 0x81540B40
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> R3 uptime is 49 minutes
> System returned to ROM by reload
> System image file is "flash:c2600-jk9o3s-mz.122-7b.bin"
>
> cisco 2621 (MPC860) processor (revision 0x102) with 60416K/5120K bytes
> of memory.
> Processor board ID JAD045244JH (1699577316)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> Basic Rate ISDN software, Version 1.1.
> 2 FastEthernet/IEEE 802.3 interface(s)
> --More--
> 00:49:34: %SYS-5-CONFIG_I: Configured from console 2 Serial network
> interface(s)
> 4 ISDN Basic Rate interface(s)
> Integrated NT1's for 4 ISDN Basic Rate interfaces
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> R2
>
> R2#sh
> 00:51:03: %SYS-5-CONFIG_I: Configured from console by console
> R2#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.2(7b), RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Tue 05-Mar-02 01:14 by pwade
> Image text-base: 0x600089A8, data-base: 0x61684000
>
> ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> SOFTWARE (fc1)
>
> R2 uptime is 51 minutes
> System returned to ROM by reload
> System image file is "flash:c3640-jk9o3s-mz.122-7b.bin"
>
> cisco 3640 (R4700) processor (revision 0x00) with 123904K/7168K bytes of
> memory.
> Processor board ID 17652080
> R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> Primary Rate ISDN software, Version 1.1.
> Basic Rate ISDN software, Version 1.1.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 26 Serial network interface(s)
> 4 ISDN Basic Rate interface(s)
> 2 Channelized T1/PRI port(s)
> 2 Voice FXS interface(s)
> Integrated NT1's for 4 ISDN Basic Rate interfaces
> DRAM configuration is 64 bits wide with parity disabled.
> 125K bytes of non-volatile configuration memory.
> 32768K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:31 GMT-3