From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Mon Jun 10 2002 - 21:10:52 GMT-3
Try, neighbor command under router eigrp.... (on both the ends).
rgds
Nick
----- Original Message -----
From: Ajay Sirohi <ccie@certworth.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, June 11, 2002 8:59 AM
Subject: EIGRP Adjacency across ATM Cloud
> I have an ATM attached local Router under my control ...
>
> I now have the challenge of forming EIGRP adjacency with another Cisco
Router
> across the service provider ATM Cloud.
>
> --------->>>
>
> I discover PVC parameters using LMI.
>
> I configure the VPI/VCI and map IP parameters.
>
> Vow !!! I can ping the other end right away.
>
> But no EIGRP adjacency in sight...... debug eigrp "x" does not bring any
> clue...
>
> What would you folks suggest ???
>
> Thanks,
>
> .............
> Certworth
> 3rd Try
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:30 GMT-3