From: Jake (jakeczyz@xxxxxxxxx)
Date: Thu May 30 2002 - 23:12:39 GMT-3
Jason,
Under EACH line you will be using for outbound console access, add the followin
g 2
commands:
transport input telnet
no exec
This will stop the 2509 (2511, cs500, etc) router from attempting to initiate a
n INBOUND
console session as soon as it detects the slightest voltage on the wire. (Which
is
causing your line to be busy and your outbound connection to fail.) I had the s
ame
problem when I first build my rack with my CS500.
HTH,
Jake
9102
--- Jason Cash <cash2001@swbell.net> wrote:
> I am facing a problem on my 2509. When ever I try to access a device by
> hostname it is states the following:
>
> ts#r1
> Translating "r1"
> Trying r1 (10.0.0.1, 2001)...
> % Connection refused by remote host
>
> Now, I know how to interpret this, but I never initiated the connection.
> I 'clear line 1' then 'show line' and see the line free. Clear another
> line (which I never initiated) and then 'sh line' and see the first damn
> line active again! This is weird and know I can't be the only one to
> experience this!
>
> ts#r1
> Translating "r1"
> Trying r1 (10.0.0.1, 2001)...
> % Connection refused by remote host
>
> ts#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 CTY - - - - - 0 0 0/0
> -
> * 1 TTY 9600/9600 - - - - - 0 1 9/29
> -
> 2 TTY 9600/9600 - - - - - 0 1 0/0
> -
> * 3 TTY 9600/9600 - - - - - 0 2 9/29
> -
> * 4 TTY 9600/9600 - - - - - 0 2 9/28
> -
> * 5 TTY 9600/9600 - - - - - 0 0 10/31
> -
> 6 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 7 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 8 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 9 AUX 9600/9600 - - - - - 0 0 0/0
> -
> 10 VTY - - - - - 0 0 0/0
> -
> 11 VTY - - - - - 0 0 0/0
> -
> 12 VTY - - - - - 0 0 0/0
> -
> 13 VTY - - - - - 0 0 0/0
> -
> 14 VTY - - - - - 0 0 0/0
> -
>
> ts#clear line 1
> [confirm]
> [OK]
> ts#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 CTY - - - - - 0 0 0/0
> -
> 1 TTY 9600/9600 - - - - - 0 89 9/29
> -
> 2 TTY 9600/9600 - - - - - 0 1 0/0
> -
> * 3 TTY 9600/9600 - - - - - 0 2 9/29
> -
> * 4 TTY 9600/9600 - - - - - 0 2 9/29
> -
> * 5 TTY 9600/9600 - - - - - 0 0 10/32
> -
> 6 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 7 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 8 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 9 AUX 9600/9600 - - - - - 0 0 0/0
> -
> 10 VTY - - - - - 0 0 0/0
> -
> 11 VTY - - - - - 0 0 0/0
> -
> 12 VTY - - - - - 0 0 0/0
> -
> 13 VTY - - - - - 0 0 0/0
> -
> 14 VTY - - - - - 0 0 0/0
> -
>
> ts#clear line 3
> [confirm]
> [OK]
> ts#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 CTY - - - - - 0 0 0/0
> -
> * 1 TTY 9600/9600 - - - - - 0 116 9/29
> -
> 2 TTY 9600/9600 - - - - - 0 1 0/0
> -
> 3 TTY 9600/9600 - - - - - 0 3 9/29
> -
> * 4 TTY 9600/9600 - - - - - 0 2 9/29
> -
> * 5 TTY 9600/9600 - - - - - 0 0 10/32
> -
> 6 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 7 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 8 TTY 9600/9600 - - - - - 0 0 0/0
> -
> 9 AUX 9600/9600 - - - - - 0 0 0/0
> -
> 10 VTY - - - - - 0 0 0/0
> -
> 11 VTY - - - - - 0 0 0/0
> -
> 12 VTY - - - - - 0 0 0/0
> -
> 13 VTY - - - - - 0 0 0/0
> -
> 14 VTY - - - - - 0 0 0/0
> -
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:12 GMT-3