From: elping (elping@xxxxxxxxxx)
Date: Fri May 31 2002 - 00:18:13 GMT-3
dude :
this helped me thanks.....I was having the same problem as jason
Jake wrote:
> Jason,
>
> Under EACH line you will be using for outbound console access, add the follow
ing 2
> commands:
>
> transport input telnet
> no exec
>
> This will stop the 2509 (2511, cs500, etc) router from attempting to initiate
an INBOUND
> console session as soon as it detects the slightest voltage on the wire. (Whi
ch is
> causing your line to be busy and your outbound connection to fail.) I had the
same
> problem when I first build my rack with my CS500.
>
> HTH,
> Jake
> 9102
>
> --- Jason Cash <cash2001@swbell.net> wrote:
> > I am facing a problem on my 2509. When ever I try to access a device by
> > hostname it is states the following:
> >
> > ts#r1
> > Translating "r1"
> > Trying r1 (10.0.0.1, 2001)...
> > % Connection refused by remote host
> >
> > Now, I know how to interpret this, but I never initiated the connection.
> > I 'clear line 1' then 'show line' and see the line free. Clear another
> > line (which I never initiated) and then 'sh line' and see the first damn
> > line active again! This is weird and know I can't be the only one to
> > experience this!
> >
> > ts#r1
> > Translating "r1"
> > Trying r1 (10.0.0.1, 2001)...
> > % Connection refused by remote host
> >
> > ts#sh line
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> > Int
> > * 0 CTY - - - - - 0 0 0/0
> > -
> > * 1 TTY 9600/9600 - - - - - 0 1 9/29
> > -
> > 2 TTY 9600/9600 - - - - - 0 1 0/0
> > -
> > * 3 TTY 9600/9600 - - - - - 0 2 9/29
> > -
> > * 4 TTY 9600/9600 - - - - - 0 2 9/28
> > -
> > * 5 TTY 9600/9600 - - - - - 0 0 10/31
> > -
> > 6 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 7 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 8 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 9 AUX 9600/9600 - - - - - 0 0 0/0
> > -
> > 10 VTY - - - - - 0 0 0/0
> > -
> > 11 VTY - - - - - 0 0 0/0
> > -
> > 12 VTY - - - - - 0 0 0/0
> > -
> > 13 VTY - - - - - 0 0 0/0
> > -
> > 14 VTY - - - - - 0 0 0/0
> > -
> >
> > ts#clear line 1
> > [confirm]
> > [OK]
> > ts#sh line
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> > Int
> > * 0 CTY - - - - - 0 0 0/0
> > -
> > 1 TTY 9600/9600 - - - - - 0 89 9/29
> > -
> > 2 TTY 9600/9600 - - - - - 0 1 0/0
> > -
> > * 3 TTY 9600/9600 - - - - - 0 2 9/29
> > -
> > * 4 TTY 9600/9600 - - - - - 0 2 9/29
> > -
> > * 5 TTY 9600/9600 - - - - - 0 0 10/32
> > -
> > 6 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 7 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 8 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 9 AUX 9600/9600 - - - - - 0 0 0/0
> > -
> > 10 VTY - - - - - 0 0 0/0
> > -
> > 11 VTY - - - - - 0 0 0/0
> > -
> > 12 VTY - - - - - 0 0 0/0
> > -
> > 13 VTY - - - - - 0 0 0/0
> > -
> > 14 VTY - - - - - 0 0 0/0
> > -
> >
> > ts#clear line 3
> > [confirm]
> > [OK]
> > ts#sh line
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> > Int
> > * 0 CTY - - - - - 0 0 0/0
> > -
> > * 1 TTY 9600/9600 - - - - - 0 116 9/29
> > -
> > 2 TTY 9600/9600 - - - - - 0 1 0/0
> > -
> > 3 TTY 9600/9600 - - - - - 0 3 9/29
> > -
> > * 4 TTY 9600/9600 - - - - - 0 2 9/29
> > -
> > * 5 TTY 9600/9600 - - - - - 0 0 10/32
> > -
> > 6 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 7 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 8 TTY 9600/9600 - - - - - 0 0 0/0
> > -
> > 9 AUX 9600/9600 - - - - - 0 0 0/0
> > -
> > 10 VTY - - - - - 0 0 0/0
> > -
> > 11 VTY - - - - - 0 0 0/0
> > -
> > 12 VTY - - - - - 0 0 0/0
> > -
> > 13 VTY - - - - - 0 0 0/0
> > -
> > 14 VTY - - - - - 0 0 0/0
> > -
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:12 GMT-3