From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Fri May 24 2002 - 03:40:53 GMT-3
afaik, tags are supported by EIGRP & OSPF.
Pl. email me if you need examples.
hth
Nick
----- Original Message -----
From: "Mingzhou Nie" <mnie@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, May 24, 2002 3:54 PM
Subject: route tag
> Hi, all,
>
> I have seen someone using route tag instead of distribute list to
> control redistributions. I couldn't get it work. if I do following.
>
> router igrp 1
> redistribute ospf 1 route-map ospftag
> passive-interface BRI0
> passive-interface Serial0.1
> passive-interface TokenRing0
> network 170.100.0.0
> default-metric 10000 100 255 1 1500
> !
> ip classless
> !
> dialer-list 1 protocol ip permit
> route-map ospftag permit 10
> set tag 1
>
>
> On the downstream igrp router, I don't the tag in all routes that are
> redistributed from ospf.
>
> Ming
>
> =====
> - | |
> :|||: :|||:
> :|||||||: :|||||||:
> .:|||||||||||:.:|||||||||||:.
> C i s c o S y s t e m s
> www.cisco.com/tac
> Empowering the Internet Generation
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3