From: Jonathan Natale (jonatale@xxxxxxxxxxxxx)
Date: Fri May 24 2002 - 12:20:37 GMT-3
bgp does not have a tag; it does have a community, which is similar.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dang Quang Minh
Sent: Thursday, May 23, 2002 11:18 PM
To: 'Mingzhou Nie'; ccielab@groupstudy.com
Subject: RE: route tag
Hi
Igrp does not support route tag. RIP2, EIGRP, ISIS,OSPF, BGP does
support
See Doyle II, page 256.
Minh
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mingzhou Nie
Sent: Friday, May 24, 2002 12:54 PM
To: ccielab@groupstudy.com
Subject: route tag
Hi, all,
I have seen someone using route tag instead of distribute list to
control redistributions. I couldn't get it work. if I do following.
router igrp 1
redistribute ospf 1 route-map ospftag
passive-interface BRI0
passive-interface Serial0.1
passive-interface TokenRing0
network 170.100.0.0
default-metric 10000 100 255 1 1500
!
ip classless
!
dialer-list 1 protocol ip permit
route-map ospftag permit 10
set tag 1
On the downstream igrp router, I don't the tag in all routes that are
redistributed from ospf.
Ming
=====
- | |
:|||: :|||:
:|||||||: :|||||||:
.:|||||||||||:.:|||||||||||:.
C i s c o S y s t e m s
www.cisco.com/tac
Empowering the Internet Generation
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3