route tag

From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Fri May 24 2002 - 02:54:22 GMT-3

• Next message: chenyan: "log problem?"
• Previous message: ntcaffeine@xxxxxxx: "Calling all AZ CCIE Candidates"
• Next in thread: Dang Quang Minh: "RE: route tag"
• Maybe reply: Dang Quang Minh: "RE: route tag"
• Maybe reply: David Luu: "Re: route tag"
• Maybe reply: Nick Shah: "Re: route tag"
• Maybe reply: Jonathan Natale: "RE: route tag"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi, all,

I have seen someone using route tag instead of distribute list to
control redistributions. I couldn't get it work. if I do following.

router igrp 1
 redistribute ospf 1 route-map ospftag
 passive-interface BRI0
 passive-interface Serial0.1
 passive-interface TokenRing0
 network 170.100.0.0
 default-metric 10000 100 255 1 1500
!
ip classless
!
dialer-list 1 protocol ip permit
route-map ospftag permit 10
 set tag 1

On the downstream igrp router, I don't the tag in all routes that are
redistributed from ospf.

Ming

=====
- | |
       :|||: :|||:
     :|||||||: :|||||||:
  .:|||||||||||:.:|||||||||||:.
    C i s c o S y s t e m s
        www.cisco.com/tac
Empowering the Internet Generation

• Next message: chenyan: "log problem?"
• Previous message: ntcaffeine@xxxxxxx: "Calling all AZ CCIE Candidates"
• Next in thread: Dang Quang Minh: "RE: route tag"
• Maybe reply: Dang Quang Minh: "RE: route tag"
• Maybe reply: David Luu: "Re: route tag"
• Maybe reply: Nick Shah: "Re: route tag"
• Maybe reply: Jonathan Natale: "RE: route tag"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3