From: Cheol (netp@xxxxxxxxxx)
Date: Wed May 22 2002 - 22:47:08 GMT-3
turn on split-horizon with both...
=================== ===========================================================
==== (?) ??? ??? ???? ???? 13-25 ???? 203? ??: 02-784-0957~8 ??: 02-784-0959 ?
? ?(???? Network Engineer) ???: 016-263-1632 ==================================
=============================
----- Original Message -----
From: "Treptow, Georg" <gxtrept@qwest.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 23, 2002 10:06 AM
Subject: Redistribution from OSPF to IGRP issues
> Hello,
>
> I am trying to redistribute 2 loopback networks from OSPF into IGRP but
> neither will show up int the routing table.
>
>
> Router 7(OSPF) ---------/---------- Router 5 (OSPF/IGRP)
> ---------/----------Router 4 (IGRP)
>
> When I do a debug on R4 I get this:
>
> 07:59:15: network 200.200.200.0, metric 4294967295 (inaccessible)
> 07:59:15: network 200.200.100.0, metric 4294967295 (inaccessible)
>
> Any help is appreciated,
>
> Thanks in advance.
>
> Georg
>
> ------------------------------------------------------------------------
> R4 config:
>
> interface Serial0/1
> ip address 137.20.200.18 255.255.255.240
> no ip directed-broadcast
> encapsulation frame-relay IETF
> frame-relay map ip 137.20.200.17 405 broadcast
> no frame-relay inverse-arp
> !
> router igrp 1
> passive-interface default
> no passive-interface Serial0/1
> network 137.20.0.0
>
> -------------------------------------------------------------------------
> R5 config:
>
> interface Serial2/0
> ip address 137.20.25.2 255.255.255.0
> !
> interface Serial2/1
> no ip address
> encapsulation frame-relay IETF
> keepalive 15
> no frame-relay inverse-arp
> !
> interface Serial2/1.2 point-to-point
> ip address 137.20.200.17 255.255.255.240
> no ip split-horizon
> frame-relay interface-dlci 504
> !
> router ospf 1
> log-adjacency-changes
> area 1 virtual-link 137.20.33.33
> area 1 virtual-link 200.200.100.1
> redistribute igrp 1 metric 100 metric-type 1 subnets
> passive-interface default
> no passive-interface Ethernet0/0
> no passive-interface Serial2/0
> no passive-interface Serial2/1.1
> no passive-interface BRI3/0
> network 137.20.25.0 0.0.0.255 area 2
> network 137.20.64.0 0.0.15.255 area 0
> network 137.20.100.32 0.0.0.31 area 1
> neighbor 137.20.100.33
> neighbor 137.20.100.35
> !
> router igrp 1
> redistribute ospf 1 metric 72 200000 255 1 1500
> passive-interface default
> no passive-interface Serial2/1.2
> network 137.20.0.0
>
> --------------------------------------------------------------------
>
> R7 config:
>
> interface Loopback0
> ip address 200.200.200.1 255.255.255.0
> no ip directed-broadcast
> ip ospf network point-to-point
> ip ospf interface-retry 0
> !
> interface Serial9
> ip address 137.20.25.1 255.255.255.0
> no ip directed-broadcast
> ip ospf interface-retry 0
> clockrate 72000
> !
> router ospf 1
> router-id 200.200.200.1
> passive-interface default
> no passive-interface Ethernet0
> no passive-interface Serial9
> network 137.20.25.0 0.0.0.255 area 2
> network 200.200.200.0 0.0.0.255 area 2
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:05 GMT-3