From: Treptow, Georg (gxtrept@xxxxxxxxx)
Date: Wed May 22 2002 - 22:06:54 GMT-3
Hello,
I am trying to redistribute 2 loopback networks from OSPF into IGRP but
neither will show up int the routing table.
Router 7(OSPF) ---------/---------- Router 5 (OSPF/IGRP)
---------/----------Router 4 (IGRP)
When I do a debug on R4 I get this:
07:59:15: network 200.200.200.0, metric 4294967295 (inaccessible)
07:59:15: network 200.200.100.0, metric 4294967295 (inaccessible)
Any help is appreciated,
Thanks in advance.
Georg
------------------------------------------------------------------------
R4 config:
interface Serial0/1
ip address 137.20.200.18 255.255.255.240
no ip directed-broadcast
encapsulation frame-relay IETF
frame-relay map ip 137.20.200.17 405 broadcast
no frame-relay inverse-arp
!
router igrp 1
passive-interface default
no passive-interface Serial0/1
network 137.20.0.0
-------------------------------------------------------------------------
R5 config:
interface Serial2/0
ip address 137.20.25.2 255.255.255.0
!
interface Serial2/1
no ip address
encapsulation frame-relay IETF
keepalive 15
no frame-relay inverse-arp
!
interface Serial2/1.2 point-to-point
ip address 137.20.200.17 255.255.255.240
no ip split-horizon
frame-relay interface-dlci 504
!
router ospf 1
log-adjacency-changes
area 1 virtual-link 137.20.33.33
area 1 virtual-link 200.200.100.1
redistribute igrp 1 metric 100 metric-type 1 subnets
passive-interface default
no passive-interface Ethernet0/0
no passive-interface Serial2/0
no passive-interface Serial2/1.1
no passive-interface BRI3/0
network 137.20.25.0 0.0.0.255 area 2
network 137.20.64.0 0.0.15.255 area 0
network 137.20.100.32 0.0.0.31 area 1
neighbor 137.20.100.33
neighbor 137.20.100.35
!
router igrp 1
redistribute ospf 1 metric 72 200000 255 1 1500
passive-interface default
no passive-interface Serial2/1.2
network 137.20.0.0
--------------------------------------------------------------------
R7 config:
interface Loopback0
ip address 200.200.200.1 255.255.255.0
no ip directed-broadcast
ip ospf network point-to-point
ip ospf interface-retry 0
!
interface Serial9
ip address 137.20.25.1 255.255.255.0
no ip directed-broadcast
ip ospf interface-retry 0
clockrate 72000
!
router ospf 1
router-id 200.200.200.1
passive-interface default
no passive-interface Ethernet0
no passive-interface Serial9
network 137.20.25.0 0.0.0.255 area 2
network 200.200.200.0 0.0.0.255 area 2
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:05 GMT-3