From: yijibin (yijibin@xxxxxxxxxxxxxxxx)
Date: Wed May 22 2002 - 22:41:16 GMT-3
??? yijibin
ChoiceWay Technologies Co.,Ltd
http://www.choiceway.com.cn
Tele:010-62385177-1707 Fax:010-62385159
Mobile:13910137921
E-mail:yijibin@choiceway.com.cn
----- Original Message -----
From: "yijibin" <yijibin@choiceway.com.cn>
To: "Taimoor" <taimoor@taimoor.com>
Sent: Thursday, May 23, 2002 9:22 AM
Subject: Re: IPX Help
> You can creat 4 subinterface , and give one ipx network number for ervery sub
interface and use different encap type. Then you can use "debug ip packet" to w
atch the ipx data flow. You can see a error message with the "ipx network numb
er" and the coming interface( subinterface ). So now ,you konw the correct ipx
network and encap type!
> yijibin
>
> ----- Original Message -----
> From: "Taimoor" <taimoor@taimoor.com>
> To: "Christopher E. Miller" <chrimill@cisco.com>; <ccielab@groupstudy.com>
> Sent: Thursday, May 23, 2002 7:44 AM
> Subject: RE: IPX Help
>
>
> > You might also want to take into consideration the encapsulation. If the
> > encapsulation is not the same you will not see the IPX packets. I suggest
> > try all the encap types and when you hit the right one you should see bad
> > network number in the IPX debugs.
> > Thanks.
> >
> > Taimoor
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Christopher E. Miller
> > > Sent: Wednesday, May 22, 2002 4:27 PM
> > > To: ccielab@groupstudy.com
> > > Subject: IPX Help
> > >
> > >
> > > Is there a good reason I can't determine the unknown IPX network
> > > besides me
> > > being an idiot. Two routers both attach via ethernet. I enable
> > > IPX routing,
> > > put one network on one and a different network on the other. Do
> > > deb ipx pac
> > > and NOTHING.....
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:05 GMT-3