From: ying chang (ying_c@xxxxxxxxxxx)
Date: Mon May 20 2002 - 09:38:08 GMT-3
Ooops. Take out the rip.
Chang
>From: "Bezverkhi, Serguei" <Serguei.Bezverkhi@hp.com>
>Reply-To: "Bezverkhi, Serguei" <Serguei.Bezverkhi@hp.com>
>To: "ying chang" <ying_c@hotmail.com>
>CC: <ccielab@groupstudy.com>
>Subject: RE: RIP NLSP and SAP filtering
>Date: Sun, 19 May 2002 22:14:05 -0400
>
>Unfortunately it is impossible to use: distribute-sap-list Filter-Out in
>rip
>You can use " in" keyword only with interfaces.
>
>
>
>
>-----Original Message-----
>From: ying chang [mailto:ying_c@hotmail.com]
>Sent: May 19, 2002 10:04 PM
>To: Bezverkhi, Serguei; ccielab@groupstudy.com; Kato Jr, Masao G
>Subject: Re: RIP NLSP and SAP filtering
>
>
>Hi,
>
>Change "distribute-sap-list Filter-Out out rip" to "distribute-sap-list
>Filter-Out in rip" should solve your problem. You have to filter saps
>before
>it entering NLSP - after it enter the NLSP, there's nothing you can do
>about
>it.
>
>Chang
>
>
>
>
> >From: "Bezverkhi, Serguei" <Serguei.Bezverkhi@hp.com>
> >Reply-To: "Bezverkhi, Serguei" <Serguei.Bezverkhi@hp.com>
> >To: <ccielab@groupstudy.com>, "Kato Jr, Masao G" <mas_kato@hp.com>
> >Subject: RIP NLSP and SAP filtering
> >Date: Sun, 19 May 2002 20:26:19 -0400
> >
> >Hello gentlemen,
> >
> >I have a strange SAP filtering problem, here is the scenario. On one
> >router's loopback and Ethernet interfaces are IPX RIP, there are 2
> >static SAP (FS1 and FS2 type 4) defined on the loopback's network, and
> >two serial interfaces are NLSP with downstream neighbors.Everything
> >seems O.k.. When I try to filter outgoing sap advertisement (I want
> >just FS2 to be visible to the rest of the network), sometimes both SAP
> >disappear sometimes no changes at all. Appreciate any ideas or
> >guidelines for best practices on IPX redistribution.
> >
> >Here is the config:
> >
> >version 12.2
> >!
> >ipx routing 0000.0000.0021
> >ipx internal-network 210021
> >!
> >!
> >!
> >!
> >interface Loopback0
> > ipx network 21
> >!
> >interface Ethernet0
> > ipx network 50
> >!
> >interface Serial0
> > ipx network 122
> > ipx nlsp 212210 enable
> >!
> >interface Serial1
> > ipx network 121
> > ipx nlsp 212210 enable
> >!
> >!
> >ipx router nlsp 212210
> > distribute-sap-list Filter-Out out rip
> > area-address 0 0
> >!
> >!
> >ipx router rip
> > no network 122
> > no network 121
> >!
> >!
> >ipx sap 4 FS1 21.0000.0001.0021 451 2
> >ipx sap 4 FS2 21.0000.0002.0021 451 2
> >!
> >!
> >ipx access-list sap Filter-Out
> > deny 21 4 FS1
> > permit FFFFFFFF
> >!
> >end
> >
> >
> >
> >
> >
> >
> >Serguei Bezverkhi
> >Technical Consultant
> >HP Services
> >Hewlett-Packard (Canada) Ltd.
> >
> >514.856.6347 phone
> >514.856.6333 fax
> >514.9278254 mobile
> >
> >Serguei.Bezverkhi@hp.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:02 GMT-3