From: Bezverkhi, Serguei (Serguei.Bezverkhi@xxxxxx)
Date: Sun May 19 2002 - 21:26:19 GMT-3
Hello gentlemen,
I have a strange SAP filtering problem, here is the scenario. On one
router's loopback and Ethernet interfaces are IPX RIP, there are 2
static SAP (FS1 and FS2 type 4) defined on the loopback's network, and
two serial interfaces are NLSP with downstream neighbors.Everything
seems O.k..
When I try to filter outgoing sap advertisement (I want just FS2 to be
visible to the rest of the network), sometimes both SAP disappear
sometimes no changes at all. Appreciate any ideas or guidelines for best
practices on IPX redistribution.
Here is the config:
version 12.2
!
ipx routing 0000.0000.0021
ipx internal-network 210021
!
!
!
!
interface Loopback0
ipx network 21
!
interface Ethernet0
ipx network 50
!
interface Serial0
ipx network 122
ipx nlsp 212210 enable
!
interface Serial1
ipx network 121
ipx nlsp 212210 enable
!
!
ipx router nlsp 212210
distribute-sap-list Filter-Out out rip
area-address 0 0
!
!
ipx router rip
no network 122
no network 121
!
!
ipx sap 4 FS1 21.0000.0001.0021 451 2
ipx sap 4 FS2 21.0000.0002.0021 451 2
!
!
ipx access-list sap Filter-Out
deny 21 4 FS1
permit FFFFFFFF
!
end
Serguei Bezverkhi
Technical Consultant
HP Services
Hewlett-Packard (Canada) Ltd.
514.856.6347 phone
514.856.6333 fax
514.9278254 mobile
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:01 GMT-3