From: Ajaz Nawaz (anawaz@xxxxxxxxx)
Date: Fri May 17 2002 - 05:30:54 GMT-3
Mail us back debug isdn q931 and the ppp debugs.
I would like to take a look and try to identify where it's breaking.
thanks
-----Original Message-----
From: Graham, John [mailto:john.graham@cgey.com]
Sent: 17 May 2002 09:22
To: Ajaz Nawaz; Graham, John; ccielab@groupstudy.com
Subject: RE: ISDN PRI, dial up users and digital modems
Using it, but cannot work out the problem.
-----Original Message-----
From: Ajaz Nawaz [mailto:anawaz@cisco.com]
Sent: 17 May 2002 09:25
To: Graham, John; ccielab@groupstudy.com
Subject: RE: ISDN PRI, dial up users and digital modems
Debug ppp auth
Debug ppp nego
-----Original Message-----
From: Graham, John [mailto:john.graham@cgey.com]
Sent: 17 May 2002 09:05
To: 'ccielab@groupstudy.com'
Subject: ISDN PRI, dial up users and digital modems
Hi,
I am trying to get both ISDN and 56k users to be able to dial into the
channelized E1 interface on a 3640 and authenticate via radius.
The config works because the 56k users can, but when and ISDN user tries to
authenticate there is a ppp error and the connection is dropped.
I have put the "ISDN incoming-voice modem" command in and then tried "ISDN
incoming-voice data" on the S1/0:15 int. Neither made a difference.
Does anyone have experience of this ? A working config would be greatly
appreciated.
I am using IP unnumbered on the E1 and a group-async interface.
I would be greatful for any help because I am getting close to throwing the
3640 out of the window.
****************************************************************************
****************
" This message contains information that may be privileged or confidential
and
is the property of the Cap Gemini Ernst & Young Group. It is intended only
for
the person to whom it is addressed. If you are not the intended recipient,
you
are not authorized to read, print, retain, copy, disseminate, distribute, or
use
this message or any part thereof. If you receive this message in error,
please
notify the sender immediately and delete all copies of this message ".
****************************************************************************
****************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3